Product Image |
Item Name- |
Price |
 |
Hand file is 3/4" wide, parallel width, one safety edge. A general purpose file used primarily for working on flat surfaces. Finer cuts for precision... |
$26.95
... more info
|
 |
Used for filing in curved surfaces and in corners. Gently tapered in width and thickness, they are cut and useable right to the point. Thinner in... |
$50.95
... more info
|
 |
Tapered in thickness and coming to a point. Double cut on both sides. 00 - Coarsest 0 - Coarse 1 - Medium 2 -... |
$51.95
... more info
|
 |
Barrette File. Tapered in width and thickness, coming to a point. Only flat side is cut, providing safe edge and top. Double cut. |
$32.95
... more info
|
 |
Crossing File. Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the... |
$44.95
... more info
|
 |
Parallel in width and thickness. Used for filing slots and corners. File width is 1/2", length is 6", and thickness is 7/64". 00 - Coarsest 0... |
$25.95
... more info
|
 |
Knife shaped, cross section that is tapered in width and thickness. Edge has same thickness from point to shoulder. 00 - Coarsest 0 -... |
$28.95
... more info
|
 |
A rectangular cross section with thickness greater relative to width, than in other types. Cut on face or flat sides only. Parallel in width, tapered... |
$19.95
... more info
|
 |
4 mm diameter. 00 - Coarsest 0 - Coarse 1 - Medium 2 - Medium Standard 3 - Medium Fine 4... |
$29.95
... more info
|
 |
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides. 00 - Coarsest 0 - Coarse 1... |
$20.95
... more info
|
 |
Gradually tapered, cut and workable to the point. Double cut on all three sides. 00 - Coarsest 0 - Coarse 1 - Medium 2... |
$43.95
... more info
|
 |
Parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom. Both edges are single cut. 00 - Coarsest 0... |
$25.95
... more info
|
 |
8" Hand Bastard Cut File. Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file... |
$11.95
Add:
|
 |
8" Half Round Second Cut File. These files are popular with foundries and machinists. Use for rapid material removal while leaving a smooth finish.... |
$15.95
Add:
|