The SC-2 has been in production since 1997. It is a proven design that we have steadily refined every year. Thousands of artists in the U.S., Canada, Europe, and Japan love their SC-2. The SC-2 is popular in art centers, colleges, craft classes, and even engineering laboratories.
The high-tech ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even at extended hold times.
Large Yet Portable
The SC-2 can hold three shelves of silver clay yet is portable enough to take with you to classes. Program the firing schedule that is perfect for your projects. You are not stuck with preset programs. The programmer turns itself off after the firing is completed. (Please note, however, that you should be near the kiln at the expected shutoff time.) The SC-2 is great in classrooms because the elements are embedded in ceramic fiber.
Even Heat Distribution
The newest SC-2 has two separate heating elements in the left and right sides of the firing chamber. The back of the chamber has no element. Extensive testing shows that the heat distribution in the current SC-2 is more even throughout the firing chamber, because heat does not build up in the back of the kiln.
Affordable, Easy to Program
The SC-2, for a digital kiln, is surprisingly affordable and proudly made in the U.S.A. to exacting standards. It fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature, and hold time. Use the hold feature to automatically soak any type of clay silver to its recommended time.
The fast-firing element is embedded in the firing chamber shell. Each SC-2 includes a 1/4â€ť thick ceramic fiber shelf.
- On/off toggle switch
- Built-in base; no extra stand needed
- Door opens 180 degrees for easy loading
- The case is slotted for air circulation.
- Electrical components in the base stay cool even at extended hold times.
- The embedded element heats from the two sides for improved heat distribution.
- Top vent complete with tapered plug for lost wax casting
- Includes a 1/4â€ť thick ceramic fiber shelf
- Optional SC-2 glass view port
- Optional 6 1/2â€ť wide bead door with mandrel holder
- Colorful 28-page kiln instruction manual (In addition, the kiln also comes with a separate controller manual.)
The Amazing Digital Controller
The reliable Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns
- Design programs with up to 8 segments (steps) in Ramp-Hold mode.
- Fire to a single temperature at a single speed in the simplified Single Speed mode.
- Ramp-Hold mode can store 4 programs.
- Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
- Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
- Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
- Add Hold Time during firing without having to stop the kiln to reprogram.
- Control both heating and cooling in Ramp-Hold.
- Program Review lets you check the program you are about to fire.
- Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
- Temperature display throughout firing and cooling in your choice of Â°F or Â°C
- Thermocouple Offset adjusts the thermocouple readout.
- Set the Delay to turn on the kiln later to suit your schedule.
- Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
- 12 Month Warranty
- LED Lights show whether you are in program, review, or firing mode.
SC2's Firing Chamber: 7 3/4" deep, 8" wide, 5 3/4" high